Thanks to Prof Hwang for being a great teacher.
Ejs open source Vernier calipers applet with many options for smallest division
This is an EJS version of vernier caliper with option for positive or negative zero error for faulty caliper(Adjust the vertical slider up/down).
Click the checkbox to find out the base unit and the correct value.
You can select different type of vernier caliper,too (from the selection list).
Vernier calipers applet with many options for smallest division by Prof Hwang and lookang
Thanks to Prof Hwang for sharing his original source codes, his passion for sharing knowledge and guidance .
This work is licensed under a Creative Commons Attribution 2.5 Taiwan License.
not any more, think wikipedia got some rules against external links to discussion forum, some body always delete the link. accurate as 01 dec 2009http://en.wikipedia.org/wiki/Caliper
Vernier calipers can measure internal dimensions (using the uppermost jaws in the picture at right), external dimensions using the pictured lower jaws, and depending on the manufacturer, depth measurements by the use of a probe that is attached to the movable head and slides along the centre of the body. This probe is slender and can get into deep grooves that may prove difficult for other measuring tools.
The vernier scales can be in metric measurements on the upper and lower part of the scale.
Vernier calipers commonly used in industry provide a precision to a hundredth of a millimetre (10 micrometres).
A more precise instrument used for the same purpose is the micrometer
.Parts of a vernier caliper:
Outside jaws: used to measure external diameter or width of an object (Blue)
Inside jaws: used to measure internal diameter of an object
Depth probe: used to measure depths of an object or a hole ( not shown in this model)
Main scale: gives measurements in mm.
Vernier gives measurements up to one decimal places in mm
Retainer: used to block movable part to allow the easy transferring a measurement ( not shown in this model)
The Vernier calipers model has
an object (Blue) for the internal jaws to measure width of an object with slider to control width of the object and simple drag action to control position of object.
an object (Green) for external jaws to measure internal diameter of a cylinder for example with slider to control dimensions of the cylinder.
a slider for zero error slider
checkbox for hint to scaffold the learners attention and point of focus
checkbox for answer to show the meaning of reading on the main scale and the vernier scale with zero error calculations if any.
drop down menu of the various common vernier scales for sense making and additional testing out by learners their ideas of how vernier works.
fine <> control buttons for learners to manipulate the model with single incremental precision
slider control for fast changes in the vernier measurement
reset button to bring simulaton back to original (default) setting.
A youtube video made to spread the news of learning by doing & exploring sense making physics.
Modifications done are:
1. cant remember now
June 03 2009
34. left and right button for fine control of slider
35. added scaffolds of the hints to be more meaningful, show exactly the difficult cases of understanding the reading with zero errors
36. added the final answer also to display the logic of how the top scale + lower scale + error.
37. fool prove it to work even for difficult cases the scaffolds are dynamically displayed
July 23 2009
38. added autoscale for hard to see scaffolds
39. change the text to the new version in Ejs 4.1 pixel size = true for nicer display
September 08 2009
40. added object blue for internal jaws with proper constraints and push if touch and slider control
41. added green object for external jaws with slider control
42. redesigned the scaffolds for the zero error to reflect correctly the logic of reading with zero error
43. sync the pointers position to correctly reflect the zero error calculation
44. redesign the zero error slider to show 0.05mm instead of e=1 increment to be easily to understand
45. redesign the look and feel of the controls and the color scheme so it is easier to read white top scale on darkgrey top scale and light color bottom scale on black lines.
46. all new objects in Ejs 4.2 instead of the older objects drawing originally
47 fix bug due to 0.08 being read as 0.05 instead of 0.1 if the marking are 0, 0.05 0.1. by hwang @ http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=567.30
48. added html and png to description
49. added comments to all variables for ease of open source sharing
50 found a bug created by the pointer vss when l_x = 15.00 mm = 14.00+0.00 mm instead of the correct 15.00+0.00 caused by the slider value not 14.999999999 going to 14 and fixed it by using code
vss = (int)((x/dxm+error*unit+1.e-2)); // introduce to point to include zero error and debug need + 1.e-2 for cases where there may be error is calculation
51 fixed more bug with 2.e-2 for text1 and vss
52 added text input field for learner to test their understanding http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=1309.0
thanks to prof hwang. It has the input field for student checking their understanding especially useful for learning the importance of precision of measurement. This is because 19.40 mm is precise, 19.450 mm is too precise and 19.4 mm is not precise enough for the vernier caliper of smallest unit 0.01 mm.
53 made it possible to select either external jaws use ( example diameter of green object)
or internal jaws (example use on external dimensions of blue rectangle)
54 made the vernier caliper behavior more like a real life one with some boundary detection that works well if lightly pressed like in real life? http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=1313.0
55 it is possible by accident to over-compressed the blue object for teachable moments with the students to illustrate inappropriate use of vernier caliper
56 possible to over force blue object into be vernier caliper like in 3D z direction, but it should work nicely if the movement of the mouse on drag is gentle!
57 used prof hwang's code in blue object on drag and made the blue object behave determistically so 54-55-56 is not going to in future release of the applet, if u r looking for that, download the version 4 at the bottom post.
58 fixed an array out of bound discovered by wolfgang error http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=1183.msg5076;topicseen#msg5076
59 fixed another array runtime error when slider is drag to 70.00mm and beyond
60 made the yellow slider and vernier scale max slide to 69.80 mm to avoid over drag to very large values which is surprising possible, the applet still is measuring.
61 added depth stem and object for simulating measurement on objects like test-tube, thanks Prof Hwang inspiration to http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=1408.0
vernier cliper (inch/mm mode, dial mode, measure inner/outer diameter and depth)
62 made the dimension of web applet width = 600 to fit http://sgeducation.blogspot.com/2010/06/ejs-open-source-vernier-calipers-java.html
63 made the x max view bigger to include part of the depth probe of the vernier caliper
64 made autoscale==true when the depth probe is selected
21 july 2011
added zoom for close up view of the vernier scale on the main scale
fixed bug where 0.02mm is selected the hints is 11.98 mm is shown as 12.00 + .98 mm the top pointer jump ahead due to a code
the correct code is inserted as
if(unit==0.02)out=((int)(v*50.+dv))/50.; //// 50. instead of 50 fix bug of pointer
real photo fromhttp://www.phy.uct.ac.za/courses/c1lab/vfig03a.jpg
old embed codes
code="weecaliper09international.weecaliper09internationalApplet.class" codebase="http://home.phy.ntnu.edu.tw/~lookang/EJS/ejs_group.files/weecaliper09international.app/" archive="../../_library/ejsBasic.jar,weecaliper09international.jar" name="weecaliper09international"id="weecaliper09international" width="760" height="428">
new post 20Jan 2009
i notice a display bug but i can't figure out what is causing it. prof hwang any thought?
open source codes and creative commons attributesource code
download the *.jar for using the applet on standalone without internet connection.
31 october 2011
redo the zoom into a similar magnify just like the micrometer thanks to ability to draw students attention to the lines based on codes from http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=2268.0
by Fu-Kwun Hwang
randomize the size of the black object each time to simulation is reset for greater challenge and fun