Why the stream of water is narrower at the bottom?

The stream of water is fatter near the mouth of the faucet, and skinnier lower down. This can be understood using conservation of mass. Since water is being neither created nor destroyed, the mass of the water that leaves the faucet in one second must be the same as the amount that flows past a lower point in the same time interval. The water speeds up as it falls, so the two quantities of water can only be equal if the stream is narrower at the bottom.

Assume the velocity of water is $v(0)$ ,
the speed will increase as it fall a height h, and $v(h)=v(0)+\sqrt(2 g h)$ , where $g$ is the gravity.

The amount of water is proportional to $v(h)A(h)=v(h) \pi r^2(h)$ which is a constant.
When the water speed , it's radius become smaller.
Assume $r(0)$ is the initial radius, then $r(h)=\frac{r(0)}{\sqrt{v(0)+2 g h}}$

Modeling activity:
Try to drag the yellow square to fit with the shape of the water stream, by adjusting initial radius $r(0)$ of the stream and initial speed $v(0)$ of the water.

Embed a running copy of this simulation

Embed a running copy link(show simulation in a popuped window)

Full screen applet or Problem viewing java?Add http://www.phy.ntnu.edu.tw/ to exception site list
Press the Alt key and the left mouse button to drag the applet off the browser and onto the desktop. This work is licensed under a Creative Commons Attribution 2.5 Taiwan License

Please feel free to post your ideas about how to use the simulation for better teaching and learning.
Post questions to be asked to help students to think, to explore.
Upload worksheets as attached files to share with more users.

Let's work together. We can help more users understand physics conceptually and enjoy the fun of learning physics!

Related Topics
	Subject	Started by	Replies	Views	Last post
	Water eject from a hole in a water tank Dynamics	Fu-Kwun Hwang	0	25965	June 25, 2005, 10:22:52 am by Fu-Kwun Hwang
	Water pump Molecular Workbench	concord	0	13464	December 23, 2007, 06:42:30 am by concord
	Water surface Optics	Fu-Kwun Hwang	6	23446	June 30, 2010, 03:55:17 pm by obavtorips
	is it posbile to model water tension of a water droplet hitting surface of H20 Request for physics Simulations	lookang	0	6028	January 20, 2010, 11:10:19 pm by lookang
	Water eject from a hole in a water tank dynamics	ahmedelshfie	0	4628	May 31, 2010, 11:42:37 pm by ahmedelshfie

	Author	Topic: Why the stream of water is narrower at the bottom? (Read 9250 times)
0 Members and 1 Guest are viewing this topic. Click to toggle author information(expand message area).