NTNUJAVA Virtual Physics Laboratory
Enjoy the fun of physics with simulations!
Backup site http://enjoy.phy.ntnu.edu.tw/ntnujava/

Easy Java Simulations (2001- ) => Modern Physics => Topic started by: Fu-Kwun Hwang on April 07, 2006, 04:09:45 pm



Title: Millikan oil drop experiment
Post by: Fu-Kwun Hwang on April 07, 2006, 04:09:45 pm
Millikan's oil-drop experiment
(http://www.phy.ntnu.edu.tw/demolab/phpBB/webdata/47_mill.gif)
Oil-drop experiment was the first direct and compelling measurement of the electric charge of a single electron. It was performed originally in 1909 by the American physicist Robert A. Millikan. Using a perfume atomizer, he sprayed tiny drops of oil into a transparent chamber. At the top and bottom were metal plates hooked to a battery, making one positive (red in animation) and the other negative (blue in animation). Since each droplet picked up a slight charge of static electricity as it traveled through the air, the speed of its motion could be controlled by altering the voltage on the plates. When the space between the metal plates is ionized by radiation (e.g., X rays), electrons from the air attach themselves to oil droplets, causing them to acquire a negative charge. Millikan observed one drop after another, varying the voltage and noting the effect. After many repetitions he concluded that charge could only assume certain fixed values. The smallest of these portions was none other than the charge of a single electron.



Turn voltage on/off when you hear warning sound (if you did not turn on "auto" mode)

The oil will drop down due to gravity and reach terminal velocity (v1).
Please turn on voltage when oil almost reach the bottom of the plate (click the "Voltage on/off"  checkbox at the lower left corner of the applet)
The oil drop will move up and reach another terminal velocity (v2).
From v1,v2 and Volateg you can calculate the charge on the oil drop (may be 1-5 electron --assigned randomly)

You can change the voltage between parallel plate, and you will get different terminal velocity v2, and voltage U. But the calculated value for the charge will be the same).
Click "change Q" will change the number of electron on the oil drop.
Click "new drop" will create another oil drop (different size and different charge).
If you click auto, the simulation will turn on/off voltage automatically.


Please check out  MILLIKAN OIL-DROP EXPERIMENT (http://faraday.physics.utoronto.ca/IYearLab/millikan.pdf) or  Millikan's original paper (http://www.aip.org/history/gap/Millikan/Millikan.html#millikan1) for more detail information.


Title: Re: Millikan oil drop experiment
Post by: Rare on October 05, 2009, 11:40:19 pm
Is this objective of this simulation, ::) the classic experiments on the determination of e/m_e ( explain the main principles of one method for the determination of v and e/m_e for electrons) ? ??? Much appreciated


Title: Re: Millikan oil drop experiment
Post by: Fu-Kwun Hwang on October 06, 2009, 02:51:40 pm
Most of the experiment can only measure e/m, so Milikan design the experiment to measure the electron charge e alone. That is the reason why he got the Nobel prize.
Please check out  Millikan's original paper (http://www.aip.org/history/gap/Millikan/Millikan.html#millikan1) for more detail information.