NTNUJAVA Virtual Physics Laboratory
Enjoy the fun of physics with simulations!
Backup site http://enjoy.phy.ntnu.edu.tw/ntnujava/

JDK1.0.2 simulations (1996-2001) => Optics => Topic started by: John M. Clement on March 21, 2005, 01:17:51 pm



Title: Thin lens enhancements
Post by: John M. Clement on March 21, 2005, 01:17:51 pm
There is a common misconception that when half of a lens is covered that half of the image disappears.  This problem can be helped by two methods.  First, the simulation should be capable of drawing extra rays to show that there are multiple rays going through the lens.  This would be a useful option for the thin lens applet.

Second, a means for "blocking" part of the lens by an object should show the image becoming fainter, but still there.  This would be another useful enhancement.


Title: I hope you like this applet
Post by: Fu-Kwun Hwang on March 23, 2005, 12:50:47 pm


You can drag any one of the black dot to change the following parameters:

 focus length(f), object position (p), height of object (h), slit width or slit position, position of lens ...

If you want to download this applet, please check out     What will happened if part of the light path were blocked (http://www.phy.ntnu.edu.tw/ntnujava/viewtopic.php?t=319)


Title: j.klapkova@seznam.cz
Post by: SOUSAL on September 27, 2005, 09:25:10 pm
???